Now that the weather is getting colder, many parts of Chicago are already freezing. Towing can be a very hard task to complete, and towing in icy weather is even harder – even when you’re using a truck complete with four wheel drive. Here are our tips for safe Winter towing.
Snow Chains
This is an absolute must. Tire chains provide the extra traction that’s necessary for safe driving on snow or ice, and lessen any chances of jackknifing on a cold highway. Park your truck on a flat area with 10 feet of clearance in front and behind your truck. Put a chain down next to both front tires, with studs facing down. Put the end of each chain on the front of the tire where it’s making contact with the ground. Slowly drive the truck forward until the tires are centered onto the chains. Pull each end of the chain over the top of each tire, giving a small amount of slack room. Attach the closing device to each end of the chain – and remember that some snow chains will need you to install tension cords on the chain links using hooks or nuts. Drive the truck a short amount of room within the recommended speed limit paying attention to whether you hear any jarring noises that might mean that the chains aren’t tight enough.
Attaching the Towing Chain
Back up the truck to the back of the towed vehicle – ideally the area next to the driving wheels, since that end’s axle is likely more durable. If that part of the vehicle isn’t accessible, just use the other one. Make sure the two vehicle’s bumpers aren’t any more than 3 feet away from each other, and place the tow truck in parking mode. Wrap one side of the towing chain over the top of the truck’s back axle, making sure that it’s not accidentally wrapped around any wires or hoses. Put one side of the chain over the other end, and attach the chain end hook to the link above the axle. Make sure the chain loops are as tight as possible. Do the same actions to the other end of the chain.
Towing
Make sure both vehicle’s wheels are parallel and straight – ask the driver of the stuck vehicle to place their car in neutral and stay inside the vehicle. This will help the vehicle’s physics remain in synchronization with each other. Put your truck in the lowest gear facing forward to help prevent the tires from spinning or slipping. Slowly accelerate the gas pedal to slowly increase tension on the chain, making sure your wheels are still straight. Drive straight at a steady slow pace while traction increases, and once you’re moving more smoothly, make your speed faster at a very slow pace. Just be careful, as the drivers in front of you may pose a danger – the main danger being a driver who strikes their brakes suddenly – so it’s best to keep as much distance between your truck, the vehicle you’re towing, and any other cars in front of you. Once the towed vehicle is on firm non icy ground, stop the truck in a safe place – and of course, always make sure that your brake lights are on when you’re stopping.